FAE Australia Pacific Pty Ltd

The BL3 EX VT is a new mulcher for excavators from 12 to 20 tons. It is able to mulch logs up to 20 cm 8 in diameter and is available in two working widths, 125 and 150 models. The BL3 EX VT joins the series of FAE mulchers with Bite Limiter technology. The Bite Limiter technology features special steel profiles that limit the depth of blade action, reducing the demand for power while guaranteeing speed and exceptional performance. The rotor is equipped with the new BL blades, made from heat-treated forged steel. These blades can be re-sharpened again and again, which means they can ...

MULCHER FOR SKID STEER FROM 40 to 90 HP -Double cage frame and complete closed design with inspection doors -Rotor with reversible fixed E blades and Hardox breaker bars -Adjustable pushing frame with horizontal reinforcement tube -Boxed-in reinforced skids -Plug and play diverter valve kit to open the front hydraulic door -Oversized rotor bearings -Variable displacement hydraulic piston motors from 32cc to 65cc -2 directional anticavitation and check valve block

PMM SSL Skid Steer Mulchers. Up to 4 vegetation. Variable displacement motor for LOW FLOW and HIGH FLOW application. Heavy Duty self cleaning roller. Adjustable rear door. Floating attachment plate to follow ground contour.

DML HY 1 and 1.25 m cut 5 T to 14T Excavator Fixed Hammer Mulcher with hydraulic variable displacement 32 65 cc piston motor, extension shaft with double roller bearing, HP transmission. Patented FAE hammer design with protected bolt inside holder and re-usable blades inserts. Hardox breaker bars and wear plates. Wear protection for pulley case. Anticavitation and check valve block with 2 relief valves. Diverter valve kit for hydraulic doors with control box in operator s cabin.

Heavy Duty Stump Grinder for up to 400 Engine HP tractors, up to 1500 mm wide rotor, fixed hammers with 2 tungsten inserts, hydraulically adjustable working depth up to 300 mm, rear heavy duty roller to leave a flat finish, hydraulic tailgate to control particle size, hydraulic top link, PTO shaft with cam clutch.

UML SSL 150 VT Mulcher with fixed teeth rotor for skid steer loaders between 75 and 120 HP, equipped with a high flow kit. The most popular and renowned mulcher in the FAE line. This newly redesigned model has a lower profile with excellent visibility and a reengineered mulching chamber that allows more material to enter at once, thus increasing productivity. The new door operating system consists of a chain-drive operated by two cylinders located in the side housing of the head. Its fully enclosed body prevents debris from entering the frame area, thus keeping it cleaner. The option...

Soil stabilizer-Stump grinder, Stone crusher for tractors between 300 and 400 HP with a working depth of 50 cm Standard equipment PTO driveshaft with cam clutch, dual transmission with cast gear boxes, forged tool holders made of heat treated steel, double steel cage system machine shell WELDOX steel provide an effective protection against dust, adjustable HARDOX counter blade, bolted forged rotor axels, adjustable grid on rear hood, variable shredding chamber, front hydraulic protection hood, rear hydraulic protection grader hood, hydraulic top link, inner bolted HARDOX protections....

Rock shredder - Stone crusher - Soil stabilizer and Asphalt grinder for tractors between 180 and 360 HP with a working depth of 40 cm. Standard equipment PTO driveshaft with cam clutch, HARDOX counter blades, inner bolted HARDOX plates for complete Anti-wear protection, forged tool holders made of heat treated steel, oversized rotor bearings, double steel cage system machine shell WELDOX steel to provide an effective protection against dust, structural steel outside and wear resistant steel inside, rear hydraulic protection dozing hood for a better regulation of the output material, ...

RSL RSL DT from 1.5 m to 2.25 m cut PTO driven Fixed Hammer Rock Crusher Road Recycler Rocky Reef Crusher with single or double transmission, extension shaft with double roller bearing, HP complete gearbox transmission. G and STC FP tungsten hammers. Hardox breaker bars and bolt-on wear plates. Hydraulic rear door. Hydraulic skids for control of working depth. 3-point linkage attachment and hoses, gearbox with free wheel, PTO shaft with clutch, Hydraulic top link. Working depth up to 270 mm.

Forestry Prime Mover 275 HP PT-300 is a medium, low ground pressure only 0,23 kg cm - 3.65 psi tracked carrier with 275 HP. The robust frame and the oscillating undercarriage with sealed and lubricated track chains and dozer-style rollers, guarantee an extended lifetime of the machine, thus reducing maintenance and operating costs. The operator s cab is very comfortable with excellent visibility, while the ordinary maintenance is easy and fast thanks to the perfect access to all components. Fields of applications One of PT-300 s main characteristics is its versatility depending on t...

The new PT-175 features the same technology and components as the other models of the PrimeTech range the 275 hp PT-300, the 415 hp PT-400 and the powerful 600 hp PT-600 . It encompasses a series of improved features and solutions that turn it into an even more advanced vehicle. Main components ENGINE Cummins QSB4.5 with 160 hp and 4 in-line cylinders. HYDRAULIC CIRCUIT Sauer Danfoss components with 100 cc mulcher pump. UNDERCARRIAGE Berco MF 200, available in the STD version with 500 mm wide track shoes and LGP version with 700 mm wide track shoes , both featuring an extremely low g...

In stock soon Mulcher with swinging hammers rotor for excavators from 1T to 4T.